Check the ratio
Read the machine handbook or label before measuring anything.
Use the calculator and fuel mixing chart to measure 2-stroke oil for compatible chainsaws, strimmers, brushcutters, hedge trimmers, leaf blowers and other equipment that requires a petrol-and-oil premix. Always check your machine handbook first.
Enter your petrol volume and choose the ratio recommended by the manufacturer. The calculator will show how much 2-stroke oil to add.
Only use the column that matches the ratio stated in your machine handbook.
| Petrol | 50:1 mix | 40:1 mix | 32:1 mix | 25:1 mix |
|---|---|---|---|---|
| 1 L | 20 ml | 25 ml | 31.25 ml | 40 ml |
| 2 L | 40 ml | 50 ml | 62.5 ml | 80 ml |
| 5 L | 100 ml | 125 ml | 156.25 ml | 200 ml |
| 10 L | 200 ml | 250 ml | 312.5 ml | 400 ml |
At 50:1, add 20 ml of oil to 1 litre of petrol. At 40:1, add 25 ml. At 25:1, add 40 ml. Always use the ratio specified in your machine handbook.
Only if both manufacturers specify the same fuel, oil specification and mixing ratio. Check each machine separately.
No. 2-stroke engine oil is mixed with petrol where the engine requires it. Bar and chain oil goes into a chainsaw’s separate chain-oil reservoir.
Always prepare fuel in a clean, approved container, in a well-ventilated area and away from ignition sources.
Read the machine handbook or label before measuring anything.
Pour the required amount of petrol into a clean, fuel-approved container first.
Add the calculated amount of 2-stroke engine oil. Do not estimate the quantity.
Secure the container, shake gently, label the mixture and avoid keeping old mixed fuel.
Some chainsaws, strimmers, brushcutters, hedge trimmers, leaf blowers, pole saws and lawnmowers require petrol mixed with 2-stroke engine oil. Only use this guide when the manufacturer specifies a premix, and check the required oil specification and mixing ratio.
For chainsaws with 2-stroke engines that use premixed fuel.
For 2-stroke models that require petrol and oil to be mixed.
For compatible handheld garden machines powered by 2-stroke engines.
Only where the lawnmower handbook confirms a premix-fuel 2-stroke engine.
This is mixed with petrol at the specified ratio to lubricate the inside of a 2-stroke engine.
This goes into the chainsaw’s separate oil reservoir to lubricate the guide bar and chain. Do not add it to the fuel.
Measure your fuel mix with a marked bottle and explore Rotatech 2-stroke engine oil in sizes for occasional and regular use. For chainsaw maintenance, find separate bar and chain oil and replacement parts below.
Engine oil for compatible equipment whose manufacturer specifies a petrol-and-oil premix.
View productClear markings for 25:1, 32:1, 40:1 and 50:1 fuel ratios.
View productMedium-viscosity mineral oil with anti-fling properties to protect the bar and chain.
View productBiodegradable lubrication designed to protect chainsaw bars and chains against wear.
View productFind compatible replacement chains for thousands of popular makes and models.
Shop the rangeExplore replacement guide bars for popular chainsaw models.
Shop the rangeUse the Rotatech fuel mixing bottle to make preparing common ratios easier.
View the mixing bottle