OEM specifications
Engineered to the precise dimensions and hardness required for your machine.
Knifetime Guarantee
Rotatech wood chipper blades are made in Sheffield and guaranteed for life under the terms of our Knifetime Guarantee.
Our commitment
Made for demanding work. Backed for life.
Our wood chipper blades are made for professionals who rely on consistent cutting performance. Every blade is manufactured in Sheffield and checked against the precise dimensions and hardness required for its intended machine.
We stand behind that workmanship with our Knifetime Guarantee. Correct fitting and maintenance are essential: they help your blades perform at their best, protect your machine and prevent avoidable failure.
Official certifications
British manufacturing recognised by two official marks.
Made in Sheffield certified
This official mark recognises products manufactured in Sheffield and the city’s renowned manufacturing heritage.
Made in Britain member
The official Made in Britain mark identifies UK-manufactured products from verified British manufacturers.
Hover or tap a logo to learn more
Why Rotatech blades
Sheffield engineering behind every cutting edge
From material specification to final inspection, our blades are made to deliver the fit, durability and dependable performance professional operators need.
Long-lasting value
Designed to be professionally sharpened multiple times, helping maximise blade life and value.
Consistent quality
Every blade undergoes rigorous quality checks to support consistent, dependable performance.
British craftsmanship
Proudly manufactured by skilled engineers in Sheffield and certified Made in Sheffield.
Inside our factory
Quality at every stage
From manufacturing to final inspection, our blades pass through experienced hands in Sheffield.
Guarantee conditions
Care that protects your blades and your chipper
Knife maintenance is essential for optimum output and to reduce the risk of catastrophic failure. Follow these conditions to maintain your Knifetime Guarantee cover.
Use wet grinding
Blades must be wet-ground with an abrasive grinding wheel to minimise heat at the cutting edge.
Never use a handheld grinder
Handheld grinding can cause heat cracks and place unnecessary stress on the blade, machine and bearings.
Clean mounting surfaces
Remove all debris from the blade surface and flywheel area to prevent uneven clamping and possible breakage.
Torque bolts correctly
Tighten bolts to the machine manufacturer’s specification and replace any bolts that show signs of wear.
Set the blade-to-anvil gap
Follow the machine handbook and reset the specified clearance whenever blades are replaced.
Maintain the anvil
Keep the anvil or counter knife sharp as well as the blades to support efficient and consistent chipping.
Unsure about the correct sharpening angle?
Contact our customer support team before sharpening. We can help confirm the correct angle for your blade.
Professional maintenance
Keep the edge. Extend the working life.
Rotatech blades are designed to be sharpened multiple times. Our professional blade sharpening service uses the correct wet-grinding process to restore the cutting edge while controlling heat.
Need help with a claim?
Contact our team with your order details, blade information and clear photographs of the blade. We will review the information and explain the next step.
Contact our teamUseful information
Knifetime Guarantee FAQs
Which products are covered?
The Knifetime Guarantee applies to Rotatech wood chipper blades sold with Knifetime Guarantee cover. If you are unsure whether your blade is eligible, contact our team with the product or order details.
Can my blades be sharpened?
Yes. Rotatech chipper blades are designed to be professionally sharpened multiple times, provided sufficient usable material remains and the correct wet-grinding process and angle are used.
Does sharpening affect the guarantee?
Sharpening must follow the conditions above. Blades should be wet-ground with an abrasive wheel and must never be sharpened using a handheld grinder.
Why are the anvil and blade gap important?
A sharp anvil and the correct blade-to-anvil clearance support efficient cutting. Incorrect clearance can reduce performance and place unnecessary stress on the cutting system.
How do I ask about a guarantee claim?
Contact the Rotatech customer support team with your order information, blade details and photographs. Our team will assess the information against the Knifetime Guarantee conditions.
Made in Sheffield
Professional chipper blades, backed by people who know blades
Find replacement blades manufactured for popular wood chipper makes and models, supported by Sheffield engineering expertise.